Vertiv Liqui-tect LP6000, Инструкция по установке и эксплуатации, Страница: 36 / 82

FIELD DESCRIPTION
Alarm Status Details of alarm, if an alarm is present. The field changes color depending on type of alarm.
Cable Length
Calculated length of the connected leak-detection cable. See Calibrating Resistance to Cable Length on page 15 for
a description of how Liqui-tect calculates the length.
Cable current Amount of current running through the leak-detection cable.
Leg 1 Resistance Resistance, in Ohms, of Leg 1.
Leg 2 Resistance Resistance, in Ohms, of Leg 2
Leak Alarm Delay Count Time delay, in seconds, that passes between leak detection and alarm notification.
Contamination Alarm
Delay Count
Time delay, in seconds, that passes between contamination detection and alarm notification.
Re-alarm Countdown Time remaining before an alarm is re-annunciated.
Last Alarm Time Time the last alarm notification occurred.
sysUp Time Time passed since system was reset or powered-on.
Table 7.1 Liqui-tect home page fields
5.2 Identity Page
The Identity page displays the Liqui-tect model and system information. This page is a reference screen,
and any adjustments are made using the
Configuration Menu on page 36.
5.3 Configuration Menu
The Configuration Menu page lists options to adjust Liqui-tect system settings.
NOTE: When editing any configuration items, be sure to click
Submit Changes
to save the changes. If
you navigate from the page without submitting, the changes are lost.
The configuration options are:
• Leak Settings on page 37
• Virtual Zone Settings on page 39
• Slave Controller Settings on page 39
• Slave Zone Settings on page 40
• Network/IP Settings on page 40
• Network Statistics on page 41
• Web Settings on page 42
• Map Settings on page 42
• Clock Configuration on page 45
• NTP Configuration on page 45
• Email-SMTP/DNS Configuration on page 46
• SNMP/Syslog Configuration on page 47
• EIA-485 Port/Modbus Configuration on page 48
• BACnet Configuration on page 53
• Alarm Management on page 54
• System/Flash Management on page 55
Vertiv | Liqui-tect LP6000 Installer/User Guide | 36