SNMPv3 Privacy Secret
Pass phrase or password used for SNMPv3 Get request. This string can be composed of printable
characters with the exception of colon, tab, double quote, and question mark. Note: The entry must
be 8 or more characters but not more than 64.
SNMPv3 Trap Target Addresses
Network hosts that will receive SNMPv3 traps, identified with either a network name or IP address.
Multiple addresses must be separated by commas.
SNMPv3 Trap Port
Port used by the target host for receiving SNMPv3 traps; default is 162.
Editing the SNMPv3 Table
You can configure the amount of information displayed he table on the SNMPv3 User Settings [20] page.
1. Above the table, click
Click here to edit columns displayed in this table
.
2. Check the boxes next to the information to include in the table.
The choices let you show the same information in this screen as that displayed when folder or
link for a specific user is selected.
SNMPv1 Trap Folder
This page contains settings for network hosts that receive SNMPv1 traps. Up to 20 trap recipients may be
enabled and configured. Like the SNMPv3 pages, the settings for each target may be reached by clicking
the links in the Detail portion of the page or by clicking the folders for the trap targets. Also, data shown in
the table may be changed by clicking the link above the table.
SNMPv1 Trap Settings
SNMP Trap Target Addresses
Configure network hosts that will receive alert notifications (i.e., SNMP Traps). The host can be
identified as either an IP address or the host’s network name.
SNMP Trap Port
Port used by the target host for receiving notifications; default is 162.
SNMP Trap Community String
String identifying a 'secret' known only by those hosts that want to be notified of device status
changes. Default: public (case-sensitive).
Vertiv™ | Liebert® IntelliSlot Unity Card Installer/User Guide
58
