Vertiv™ NetSure™ IPE Series -48 VDC Outdoor Rectifier Installation and User Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
26
2.4.3
Wall Mounting Procedure
NOTE!
Torque all hardware to the values shown in the illustrations.
1.
Unpack the rectifier and mounting accessories and kits.
2.
Drill appropriately sized holes for the customer provided M10 wall anchors being used into the wall as shown in Figure
2.11. Install the M10 wall anchors into the holes (Figure 2.12).
3.
Install the mounting brackets to the rectifier. Refer to Figure 2.13 and Figure 2.14.
4.
Install the rectifier to the wall. Refer to Figure 2.15 and Figure 2.16.
Figure 2.11 Wall Mounting Hole Positions (Unit: mm)
Figure 2.12 Expansion Bolt Installation
M10*80mm
Dia: D12mm
NOTE!
The expansion bolts are customer supplied.
80
454
