VERTIMA railoc, Инструкции по сборке и обслуживанию

Страница: 5 / 21

5/21
Assembly and maintenance instructions railoc
Particularly important instructions and dangers with regard to physical and mechanical damage
are marked with the following symbol:
The operating instructions are part of the certified machine and must always be available on site!
1. Device description
1.1 Design and scope of deliver
Main unit:
Pawl with drive on vertically movable carriage, support console with two energy-consuming
cellular foam buffers Ø100x80 which are connected to the guide rail by means of clips and
notched pins in a non-positive and positive-locking manner.
Incl. 2 types of clips, grooved pins, drilling template and pre-assembled connection cables (10m).
Signal lamp, red/ green:
Indicator light for optical visualisation of the protected area protection status (red=protected area
unsafe; green=protected area safe) in a separate housing with magnet on the back for clearly
visible fastening in the shaft, pre-assembled with the main unit on 10m cable (extendable).
Standard stops for car and counterweight:
One stop each for car and counterweight, which can be screwed under commercially available
guide shoes.
Optional accessories:
 Extension cable for indicator light, 10m. With connection coupling for connecting several
extension cables.
 Inspection switch with spring finger as actuation, mountable on the main unit. Swivels via a
linkage, when the r ailoc is activated, into the projection of the travel range and stops the travel
before the stop hits the r ailoc .