Vertical Edge DX-80, Руководство пользователя, Страница: 52 / 62

Page 52 DX-80 Digital Executive Telephone User Guide
Operation – Use the Headset to Place a Call
1. While the telephone is idle, press , a DSS button, or outside
line button. The button LED flashes to indicate that the
headset is active. You hear Intercom dial tone, outside line dial
tone, or Intercom ring-back tone, depending on the function
invoked.
2. Press again to disconnect the current call.
Operation – Use the Headset to Answer a Call
1. While the telephone is ringing, press . The button LED
flashes to indicate that the headset is active. The ringing call is
answered and connected to the headset.
2. Press again to disconnect the current call.
Hidden Codes
'
The Hidden Code feature allows you to store a four-digit code so you
can dial it by pressing only one button. (To operate, the Hidden Code
must be stored on a Flexible Feature button.) This feature is typically
used to store a password for the voice mail mailbox.
Operation – Storing a Code
1. While the telephone is idle, access Flexible Feature Button
Programming (
'
) and then press the feature button to be
stored with your Hidden Code.
AVAILABLE KEY
chg
2. Press [ chg ].
SELECT FUNCTION
dir feat
3. Press [ feat ].
FTR CODE:_
bksp save chg
4. Press
'
+ {the four-digit code to store}.
5. Press [ save ].
6. Press to exit Flexible Feature Button Programming.