DX-80 Digital Executive Telephone User Guide
Page 15
Saved Number Redial
'
Saved Number Redial is normally used whenever you want to retain a
telephone number to be dialed later. The same feature code is used to
Save a Dialed Number (SDN) and to dial the saved number – Saved
Number Redial (SNR).
Operation – SDN
1. After you’ve placed an outside line call for which you want to
store the number, press
'
.
2. The dialed number is stored in the Saved Number memory.
Operation – SNR
1. When the telephone is idle, press the feature button designated
as REDIAL (if available) or press
'
.
2. The stored number is dialed.
Speed Dial Extension
–
,
System
–
Speed Dialing allows you to store frequently dialed numbers. There
are 20 speed “bins” for most extensions and 200 system speed bins
that may be shared by all extensions.
Operation – Setup
1. Press
'
.
2. Dial the Speed Dial location number (
–
).
3. Press
[
show
]. The current contents are displayed.
4. Press
[
chg
].
5. Input the number you want to store, including Pauses (
'
),
Flash
'
and Pulse To Tone Conversion (
) codes.
6. Press
[
save
]. That number is stored in this speed dial location.
7. Continue programming speed dial locations from step 2 above or
hang-up (press
twice) to exit.