- 23 -
A
NSWERING
I
NCOMING
C
ALLS
When your Edge 300 receives an incoming call, it provides both an audible
and a visual alert. The Edge 300 sounds a ringing tone from its speaker,
and displays the Caller ID information about the call on its LCD display. If
the incoming call is internal, the Edge 300 sounds two short ring bursts. If
the incoming call is external, the Edge 300 sounds one long ring burst. If
the Edge 300 is returning a call to your station (i.e., “Recall”), the Edge 300
sounds four short ring bursts.
To answer a call, perform the following steps.
1) As an incoming call rings at your station, pick up the handset, or
press the
ANS
soft key for handsfree communications.
Note:
You may also press the DND soft key to enter Do
Not Disturb mode and to send the call to voice mail. Or,
you can press the DENY soft key to send the call to voice
mail (if activated) or return a busy signal to the caller (if
not activated) .
2) Begin your conversation.
3) Hang up the handset, or press the
SPEAKER
button (if handsfree)
to end the call.
Note:
If you choose to ignore the new incoming call, the
system treats that call as a no-answer condition, and
follows the forwarding rules defined for your extension.
For details on the fowarding rules for your extension, see
your System Administrator.
9415545000
ANS DND DENY
Edge 300 User Guide
SECTION 4 - ANSWERING CALLS
