Vertex Wireless VW450, Руководство пользователя

Страница: 17 / 35

17 | p a g e
3. Basic operations
3.1 Making calls
1. Check to see that your VW450 is turned on.
2. Pick up the handset of the phone.
3. If you listen for dial tone, dial the desired telephone number. The call will be automatically made by VW450.
If you hear fast beep tone, check SIM card or signal strength.
* Note : If you can’t hear dial tone produced, check to make sure that all the parts are properly connected, hang up the phone, and try
again.
If you press ‘Flash key’, or press the switch-hook and release after dialing a number, Call will be made immediately.
When you use telephone, Analog fax connected to fax port can not be used at the same time.
3.2 Receiving calls
1. When the phone rings, pick up the telephone handset, begin to talk.
2. To disconnect after finished, replace the handset on the phone.
* Note : When there is an incoming call when you are already holding the receiver, press ‘Flash key’ to answer the call.