Vertex Water Products PureWaterCooler PureChill PWC-9100 Скачать руководство пользователя страница 17

LIMITED WARRANTY

Vertex Water Products (“Manufacturer”) sell its products through independent retailer dealers (“Dealer”) who re-
sell to the end-user customer. In this limited warranty, “Vertex” refers to Vertex Water Products and not to the
Dealer.

WHO IS COVERED BY THIS WARRANTY

This limited warranty covers only the first purchaser of the Vertex

PureWaterCooler

from a Dealer for use by

that purchaser, and is not transferrable. “Consumer Use” means personal residential household use by a consumer
or consumers. “Commercial Use” means all other uses, including (but not limited to) use for commercial, income
producing purposes and/or when purchased by a business and/or when purchased for use in an office, business, or
industrial setting. “Purchaser” means the end-user customer, and not a Vertex re-seller Dealer.

PERIOD OF COVERAGE OF THIS WARRANTY

Manufacturer warrants the complete water cooler (“the unit”) against defects in material and workmanship, sub-
ject to the exclusions described below, for a period of ONE YEAR, beginning on the later of either (a) the date of
purchase or (b) the date of manufacture as identified by the Vertex unit’s serial number. Manufacturer additionally
warrants the compressor for a period of THREE YEARS from the above date. The purchaser must provide the
original sales receipt as proof of the date of purchase. If the purchaser is unable to produce the original sales re-
ceipt, the Warranty Period commencement date will be determined by Manufacturer, in its sole and absolute dis-
cretion, based upon the unit’s serial number. This warranty does not apply if the original serial number affixed by
Manufacturer is removed, defaced, altered, obscured, tampered with, or obliterated. If Manufacturer provides a
replacement part or parts, or repairs a part or parts, under this limited warranty, then the replacement part(s) or
repaired part(s) will be covered under this limited warranty for the time remaining under the original Warranty
Period applicable to the part(s) repaired or replaced.

The duration of

ALL OTHER WARRANTIES, INCLUDING ANY AND ALL IMPLIED WARRANTIES,

INCLUDING BUT NOT LIMITED TO MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE RESTRICTED TO THE TWO-YEAR LIMITED WARRANTY PERIOD.

Some states do

not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to purchaser.

WHAT IS COVERED BY THIS WARRANTY

This limited warranty covers defects in materials or workmanship, subject to the exclusions below and for the time
period stated above. Manufacturer promises to repair or to replace, at Manufacturer’s sole and absolute discretion,
any part of this water cooler that proves to be inoperative due to a defect in material or workmanship under normal
use.

WHAT IS NOT COVERED BY THIS WARRANTY

This limited warranty does not extend to and expressly excludes:
• conditions, losses, malfunctions, or damages not resulting from defects in material or workmanship;
• conditions, malfunctions, losses, or damages or the inability to operate the Vertex unit resulting from

conditions beyond Manufacturer’s control, including but not limited to failure of the unit or any of its
parts due to damage caused by: improper installation; accident; fire; flood; windstorm; acts of God;
rodent and/or insect infestation; vandalism; modification; alteration; combination with any other device
or machine; abuse and/or misuse of the unit; negligence by purchaser or third parties; any part of the
water system that has become fouled due to liming, dirt, unsatisfactory/unsanitary water conditions,
corrosion, or faulty plumbing; failure to install, maintain, assemble, mount or place the Vertex unit in
accordance with Manufacturer’s instructions and/or local, state, or national plumbing and electrical
codes; wear and tear expected to occur in the normal course of use, including but not limited to cosmetic
rust, scratches, dents or comparable and reasonably expected losses or damages; exposure to extreme
variations in ambient environmental conditions (including but not limited to changes in heat, humidity,
moisture, or exposure to sunlight).

• labor for installation or deinstallation of the unit or any of its parts; shipping of the unit or any of its parts

to Manufacturer for repair/replacement.

In addition to the above exclusions, this limited warranty does not apply if any of the following conditions
of operation are not met: System Pressure 35 - 100 psi, Temperature 40 - 100 degrees F, PH range 4 - 10,Max
TDS 1500 PPM Max., Turbidity <1.0NTU, Hardness <20gpg, R version: <3.5 gpg, F version, Iron
<0.1 mg/l, Manganese <0.1 mg/l, Hydrogen Sulfid e <0.00 mg/l.

Содержание PureWaterCooler PureChill PWC-9100




















Отзывы: