VX-920ATEX S
ERIES
O
PERATING
M
ANUAL
22
AF M
IN
V
R
Press the assigned programmable key to reduce the
audio output to the (lower) level programmed by your
Dealer.
S
TATUS
S
ET
Press the assigned programmable key to change the
5-Tone status code. To change the status code, select
the desired digit by [
A
] key, then change the number
by [
B
]/[
C
] key, and store the number by [
D
] key.
S
TATUS
U
P
/D
OWN
Press the assigned programmable key to select a 5-
Tone status code from the pre-defined status list.
S
TATUS
C
HECK
Press the assigned programmable key to check the
5-Tone receive status code. When you press this key,
the LCD display will indicate the “Message” corre-
sponding to the receive status condition per the pre-
defined status list.
L
ONE
W
ORKER
Press the assigned programmable key to toggle the
Lone Worker feature “On” and “Off.”
The Lone Worker feature is designed to emit an alarm
for 30 seconds when the Lone Worker Timer (pro-
grammed by your Dealer) has expired. If the user
does not reset the timer by pressing the
PTT
switch,
the radio switches to the Emergency mode.
DTMF C
ODE
S
ET
(
16-
KEY
VERSION
ONLY
)
You may send the desired telephone number manu-
ally.
To dial a number manually, press the assigned pro-
grammable key, then press the desired numbers on
the front panel’s numeric key. Now, press the
PTT
switch to send the telephone number. The DTMF
tones sent during the dialing sequence will be heard
in the speaker.
A
DVANCED
O
PERATION
Содержание VX-920ATEX Series
Страница 15: ...VX 920ATEX SERIES OPERATING MANUAL 13 NOTE ...