Vertex Standard VX-450 series, Руководство по эксплуатации

Страница: 30 / 40

VX-450 S
ERIES
O
PERATING
M
ANUAL
28
S
TATUS
C
HECK ( VX-454
AND
VX-459 O
NLY
)
Press (or press and hold) the assigned Programmable
key to check the 5-Tone receive status code. When
you press (or press and hold) this key, the display
will indicate the “Message” corresponding to the re-
ceive status condition per the pre-defined status list.
D
UTY
Press (or press and hold) the assigned Programmable
key to toggle the Duty function of the 2-tone/5-tone
decoder “On” and “Off.”
When the Duty function is set to “On,” the user will
always hear (depending on the sub-audio signalling)
all traffic on the paging channel. The radio will sound
the paging alert when it receives the programmed 2-
tone/5-tone code.
When the Duty function is set to “Off,” the user will
NOT hear normal radio traffic on the paging channel.
The radio will sound the paging alert and unmute only
when it receives the programmed 2-tone/5-tone code.
ID C
HECK ( VX-454
AND
VX-459 O
NLY
)
This function allows logged ID of the DTMF Sig-
naling and 5-tone Signaling to be reviewed and re-
layed (5-tone Signaling only) to a specific station:
Press (or press and hold) the assigned programmable
key to display the logged ID of the DTMF Signaling
and 5-tone Signaling.
Press the [ A
] key to select the category (“DTMF Sig-
naling” or “5-tone Signaling”) to be reviewed, then
press the
SIDE-1
/
SIDE-2
keys to select the ID.
Press the [
B ] key to toggle the display between the
“ID code display” and “Tag display”.
Press the [ D
] key to send the Call back, when recall-
ing the ID of the “5-tone Signaling”, if desired.
You may cancel the Call back sending by press-
ing the [
C
] key. In this case, the display indicates
“
- CANCEL -
” briefly.
A
DVANCED
O
PERATION