Vertex Standard VX-450 series, Руководство по эксплуатации

Страница: 26 / 40

VX-450 S
ERIES
O
PERATING
M
ANUAL
24
FM S
CAN
(
F
OLLOW
-M
E
S
CAN
)
The FM Scan feature checks a User-assigned Prior-
ity Channel regularly as you scan other channels.
Thus, if only Channels 1, 3, and 5 (of the 8 available
channels) are designated for “Scanning,” the user may
nonetheless assign Channel 2 as the “User-assigned”
Priority Channel via the FM Scan.
To activate FM Scan, first select the channel you want
to designate as the “User-Assigned Priority Chan-
nel” and press (or press and hold) the assigned pro-
grammable key. Then rotate the
CH Selector knob to
recall to the “Scanning Start” channel which has been
programmed by your dealer to activate the scanner.
When the scanner stops on an “Active” channel, the
User-assigned Priority Channel will automatically be
checked every few seconds; if activity is found on
the User-assigned Priority Channel, the radio will
switch between it and the Dealer-Assigned Priority
Channel, if any.
S
CAN
S
ET ( VX-454
AND
VX-459 O
NLY
)
Press (or press and hold) the assigned programmable
key to add/delete the current channel to/from your
scanning list.
When you delete channel, the display indicates
“
SCN SKIP ” briefly and the “ ” icon will disappear
from the display. To restore a particular channel to
your scanning list, press (or press and hold) the as-
signed programmable key again; the display indicates
“
SCN SET ” briefly and “ ” icon will appear on the
display.
Furthermore, press (or press and hold) the assigned
programmable key while the scanner is paused, this
removes the channel from the scan list temporarily.
G
ROUP
S
CAN
S
ET ( VX-454
AND
VX-459 O
NLY
)
You may wish to have the Scanner pass through more
than one Group during the scanning process (nor-
mally, scanning is performed within the current group
only). To include the current Group in the scanning
loop, press (or press and hold) the assigned program-
mable key (the “
” icon will appear on the display).
To remove a current Group from Group Scan, press
(or press and hold) the assigned programmable key
again (the “
” icon will disappear from the display).
A
DVANCED
O
PERATION