Vertex Diagnostics UltraTRAK Скачать руководство пользователя страница 6

Страница: 6 / 50

Ultra

TRAK

IMPORTANT INFORMATION

Severe dehydration and excessive water loss may cause false low re-

sults. If you believe you are suffering from severe dehydration, consult a

healthcare professional immediately.

Test results below 60 mg/dL*

(. mmol/L) mean low blood glucose (hy-

poglycemia). Test results greater than 240 mg/dL*

(1. mmol/L) mean

high blood glucose (hyperglycemia). If you get results below 60 mg/dL

or above 240 mg/dL, and do not have symptoms, first repeat the test. If

you have symptoms or continue to get results that fall below 60 mg/dL or

above 240 mg/dL, follow the treatment advice of your healthcare profes-

sional.

Apply only capillary whole blood sample to the absorbent hole. Applying

other substances to the absorbent hole will cause inaccurate results.

If you are experiencing symptoms that are not consistent with your blood

glucose test results and you have followed all instructions described in

this owner’s manual, call your healthcare professional.

Inaccurate results may occur in severely hypotensive individuals or pa-

tients in shock. Inaccurate low results may occur for individuals expe-

riencing a hyperglycemic-hyperosmolar state, with or without ketosis.

Critically ill patients should not be tested with blood glucose meters.

Please refer to your test strip package insert for additional important

information.

*1: Kahn, R., and Weir, G.: Joslin’s Diabetes Mellitus, 1th ed. Philadelp

hia: Lea and Febiger (1994), 489.
*2: Krall, L.P., and Beaser, R.S.: Joslin Diabetes Manual. Philadelphia: Lea

and Febiger (1989), 261-26.

Содержание UltraTRAK



















































Результаты поиска

Содержание UltraTRAK

Отзывы:

Похожие инструкции для UltraTRAK

Бренды по названию

Популярные бренды

Vertex Diagnostics UltraTRAK, Руководство пользователя

Результаты поиска

Содержание UltraTRAK

Отзывы:

Похожие инструкции для UltraTRAK

Бренды по названию

Популярные бренды