www.versitron.com
19
3. Introduction
The media converter provides additional configuration settings accessible to
the user. The settings are located on the circuit board inside the product case.
The settings are provided for technical installers to adapt the converter to fit
specific application needs.
3.1 User Accessible Jumpers
The setting jumpers are not accessible by users generally. For accessing
these jumpers, the upper case must be removed from the circuit board.
An authorized and experienced technician must perform removal of the
case. The setting jumper block is located on the position shown below:
The setting functions are as follows:
JP1
Forwarding mode setting
Open - Store-and-forward mode
Short - Smart-forward mode
JP2
802.3x function setting
Open - Enable
Short - Disable
JP3
FX port duplex setting
Open - Full duplex mode
Short - Half-duplex mode
