1
2
3
1
2
How to Clean : Silicones
21
Open the juice cap, hold the chamber and juice cap
with one hand, and remove the juice cap packing with
your other hand to disassemble.
Please be careful not to drop or damage the juice cap
and chamber when disassembling the unit.
Juice Cap Packing
Mid gear
Silicone brush
Push the mid gear from the bottom side of
the chamber then the gear will be come out.
Place the mid gear back after cleaning.
Remove the silicone brush from the spinning
brush holder.
Use a cleaning brush and wash the inside and
outside of the spinning brush holder under
running water.
damage if the product is used without being
fully assembled. Grab the top and bottom of
the outer wing and pull them tight.
After cleaning, attach the silicone brush by
while pulling the inner wing inward with your
pushing on the back of the brush holder,
other hand as shown in the picture. Pull until it
cannot be pulled any further. There is a risk of
Please follow the recommended method to separate
the silicone brush. Otherwise, it may cause damage of
spinning brush holder and silicone brush.
Wash the silicone brush under running water as the
same method.
If the silicone brush cannot be inserted properly, the
packing may become wrinkled or fall out during juice
extraction.
1
2
ENG
Содержание EMOTION 5G
Страница 25: ...MEMO 25 ENG...