VersaLASER VLS3.60, Инструкции по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 77 / 121

Section 7
Basic Maintenance
Motion System Components Diagram
NOTE: #2 Mirror Cover and
X-axis Motor Cover Plates
have been removed for visibility.
1) Focus carriage
2) X-axis bearing (3)
3) #3 mirror (inside cover plate)
4) Focus lens (inside cover plate)
5) X-axis
rail (arm)
6) X-axis bearing track (2)
7) X-axis
belt
8) X-axis home sensor flag
9) X-axis idler pulley
10) #2 mirror and holder
11) X-axis motor and drive gear
12) X-Y home sensor board (upper flex board)
13) Y-axis belt (2)
14) Y-axis bearing (4) (2 on right side Y-axis rail, 2 on left side Y-axis rail)
15) Y-axis rail (2)(one right side and one left side)
16) Y-axis rail bearing track (2) (one on right side, one on left side)
17) Y-axis drive gear (2) (one on right side, one on left side)
18) Y-axis shaft (2) (one on right side, one on left side)
19) Y-axis shaft flex coupler (one on right side, one on left side)
20) Y-axis motor
21) Y-axis idler pulley (2) (one on right side, one on left side)
22) Y-axis home sensor flag
23) Flex cable
3
10
7
8
9
1
2
4
5
6
11
12
13
14
15
16
17
18
19
20
21
18
22
23
14
16
⤼㢨㤴G㐐㏘䊐㡸G㷡ᷤ䢼G㡔㫴䚌⮨G㺐ㇵ㢌G䄸⫠䐤G㣅㛹㡸G䚔G㍌G㢼␘UG㐐㏘䊐G㷡㋀㢌G⽼⓸⏈G㣅㛹G㣠⨀㢌
㦹⪌SGŒŸˆœš›Gš š›Œ”㢌G㣅㛹SG㣅㛹䞌ᷱSG㨰㛨㫸G㐐ᴸ⇨㜄G㇠㟝䚐G⤼㢨㤴G㐐㏘䊐㢌G㣅㛹⣽㜄G♤⢰G␠⢰
㫸␘UG⯜㊌G㐐㏘䊐G⺴䖼G㠸㜄G㑇㢨⏈G⭰㫴㝴G⺴㏘⤠ὤ⏈G⺼ἐ㾍䚌ᶤ⇌Gᶤ㾐G㣅㛹GᷤḰ⪰Gᴴ㥬㝘ᶤ⇌G㣅㛹
㠸㾌⪰G㢷㛨ⶸ⫨G㍌G㢼␘U
v—›Š㜄GἬ㡸㢀㢨⇌G⺴㏘⤠ὤᴴG㑇㢨⮨G㋄ㇵ㢨⇌G⤼㢨㤴G㤸⥙G㋄㐘G❄⏈G㢨G⺴䖼㢌G—™Œ”ˆ›œ™ŒGˆ“œ™Œ⪰
ⵐ㈑㐐䇠G㍌G㢼␘U
㐐㏘䊐㢨G㛰⫼⇌G㷡ᷤ䚐ᴴ㜄G♤⢰G㺐ㇵ㢌G䄸⫠䐤⪰Gᴴ㫸G㣅㛹Ɒ㡸G䟁☑G䚔G㍌G㢼␘⏈Gᶷ㡸G⏌G㍍㫴䚐␘U
㐐㏘䊐㡸G㷡㋀䚌ὤG㢨㤸㜄G䚡ㇵG㐐㏘䊐㢌G㤸㠄㡸GⅸḔG䙀⤠Ἤ⪰Gゅ㙸G⋇⏈␘UG