VersaLASER VLS3.60, Инструкции по безопасности, установке, эксплуатации и техническому обслуживанию

Страница: 21 / 121

Link to Table of Contents
User Guide
203
ULS Reference Guide Book
Software Installation and Requirements
Your computer is a critical component in the operation of the VLS system. In fact, you cannot operate the VLS system if
your computer is not connected, powered on, running Windows and running the Universal Control Panel (UCP) software.
You can only run one VLS system per computer at a time. You will need to have a separate computer for each VLS system
you own. The VLS system is not designed to be a network printer. You must operate the VLS system using the computer
that is directly attached to it via the provided 6-foot USB cable (1.82 meters). USB cables longer than 6 feet (1.82 meters)
may cause the VLS system to malfunction.
Computer and Operating System Requirements
Minimum Computer Requirements (User Supplied)
2.0 GHz processor (minimum) t
Windows XP or Windows Vista*
t
1 GB of RAM (minimum); 2 GB of RAM (minimum) for Vista t
operating systems
40 GB hard drive (15 GB free space) (minimum)
t
VGA monitor (minimum 1024 x 768 resolution)
t
CD-ROM drive/burner t
Mouse and keyboard
t
Available USB 2.0 Hi-Speed compliant port only t
Computer speakers (optional)
t
600 DPI scanner (optional)
t
Internet connection and e-mail address (optional) t
*The VLS system is only compatible with a 32-bit Windows Operating
System. See www.microsoft.com for the minimum computer requirements to
run Windows Vista. The VLS system is not designed to run on the Macintosh
Operating System.
Note:
Some computer manufacturers’ USB ports do not comply with USB 2.0 Hi-Speed standards. This may cause
the VLS system to exhibit erratic behavior. Confirm that your computer complies with USB 2.0 Hi-Speed by checking your
computer manual. For more information on USB 2.0 Hi-Speed compatibility, please visit www.usb.org.
Other USB peripheral devices that demand a large amount of computer processing power may slow down the
operation and productivity of the VLS system. If you experience problems with operation, we recommend you
disconnect other USB peripheral devices while the laser system is off.
Do not connect or disconnet other USB devices while
the laser system is running a job.