Veromatic MBI01, Инструкция по установке, эксплуатации и обслуживанию, Страница: 47 / 116

EN
47
6 Carefully remove the drip tray from the machine and remove the grill. Empty the drip tray and
clean tray and grill with lukewarm water and a brush. The drip tray may not be placed in the
dishwasher because that may damage the finish.
7 Clean the dispense area.
8 Reinstall the grill in the drip tray and put the drip tray back in its place.
9 Clean the exterior of the machine with a light damp cloth.
10 Close the door.
11
Press the “Go back” key to leave the Rinse menu and to resume normal
operation.
12
Take a ‘test’ consumption of every
product.
!
ATTENTION:
Be assured that following a maintenance all detachable parts are replaced to their
normal position before restarting the operation of the machine.
6.6
Weekly maintenance
6.6.1 Cleaning instant mixers
1 Open the door of the machine (the machine is now in service mode and on the screen you see
the rinse menu.
2 Turn the spouts of the product canisters upwards.
3 Remove the product canisters from the machine.
4 Clean the mixing systems.
•
Remove the outlet hose from the mixer house.
•
Turn the mixer locking ring counter clockwise.
•
Pull the mixer house and the funnel forward so they
detach from the mixer plate.
•
Remove the mixer paddle from the mixer axis.
•
Remove the mixer plate by turning it further counter
clockwise until the position.
•
Pull the mixer plate now forwards to remove it from
the mixer base.
•
Clean all parts in a bucket with hot water and brush
them clean.
•
Clean the exhaust channel.
•
Replace all parts in the reverse order. When placing