background image

2

WMC Series Woodburning Fireplace

20000583

Safety Information

PLeASe ReAD THIS MANUAL beFORe INSTALLINg AND USINg FIRePLACe.
IMPORTANT: 

Read all instructions and warnings carefully before starting installation.  Failure to 

follow these instructions may result in a possible fire hazard and will void the warranty.

Description

The WMC Series fireplaces are solid fuel, woodburning 

premium fireplaces. The WMC36/42 are circulating models 

with removable grilles (louvers).
Both models are fully insulated fireplaces.

Precautions

Vermont Castings Group fireplaces and component parts 

have  been  highly  tested  and  will  operate  safely  when 

installed in accordance with instructions provided in this 

manual.  Carefully  read  and  understand  all  instructions 

before

 beginning installation.

If you notice any damage to fireplace or component parts, 

immediately  report  damage  to  your  Vermont  Castings 

Group dealer.
Only use Vermont Castings Group components or the war-

ranty will be voided and a fire hazard may be created.
Vermont Castings Group warranty will be voided by and 

Vermont Castings Group disclaims any responsibility for 

the following actions:

• 

Installation by any other than a qualified installer, 

preferably NFI or WeTT (Canada) certified.

• 

Installation of any damaged fireplace or chimney 

component;

• 

Modification of fireplace, chimney assembly or 

any component parts thereof; 

(except for chase 

flashings as detailed in the Chimney Top installation 

instructions).

• 

Installation other than as instructed by Vermont 

Castings group; or

• 

Installation and/or use of any component part 

not manufactured or approved by Vermont Cast-

ings group in combination or assembly with a 

Vermont Castings group fireplace system, not-

withstanding any independent testing laboratory 

or other third party approval of such component 

parts or accessory.

Any such action may possibly cause a fire hazard.

Consult  local  building  codes  to  ensure  that  you  are  in 

compliance 

before 

installing the fireplace.

Fireplaces must be vented to the out-of-doors.

Do  not  obstruct  or  modify  air  inlets/outlets  in  any 

manner. 

Do not install combustible materials on any of the black 

fireplace surround.
burn only solid wood fuel or gas logs.
Do not install a solid fuel burning insert or other prod-

ucts not specified for use with this fireplace.

WMC36 / WMC42

Listed

UL 127 / ULC-S610

Standard for Factory built Fireplaces

Safety Information . . . . . . . . . . . . . . . . . . 2
Specifications and Framing   . . . . . . . . . . 3
Parts Identification  . . . . . . . . . . . . . . . . . 4
Chimney Requirements  . . . . . . . . . . . . . 5
Planning Information . . . . . . . . . . . . . . . . 6
Installation   . . . . . . . . . . . . . . . . . . . . . . . 7
Replacement Parts  . . . . . . . . . . . . . . . . 18
Accessories . . . . . . . . . . . . . . . . . . . . . . 19

Table of Contents

Proposition 65 Warning:

 Fuels used in gas, woodburn-

ing or oil fired appliances, and the products of combus-

tion of such fuels, contain chemicals known to the State 

of  California  to  cause  cancer,  birth  defects  and  other 

reproductive harm.
California Health & Safety Code Sec. 25249.6

WARNINg: Check with your electronics manufacturer 

before installing a television or other electronic device 

above this fireplace.

Drafts

The fireplace should not be located in areas that create drafts 

(ie: frequently opened doors and central heating air inlets/

outlets) that hamper the normal flow of air into the fire.

gas Logs

If you plan to install a gas log, the gas line should be installed 

before

 framing the fireplace. The gas line must be installed 

by a certified gas line installer.

Содержание Royal Collection WMC36

























Отзывы: