21
07/20
7101-802G
4 Mounting Brackets
Figure 5.11
F. Cast Surround Assembly
1. Remove contents from box being careful not to scratch
or damage the cast trim pieces.
2. Lay surround pieces face down on a protected surface to
prevent scratching.
3. Align the bosses on the top piece to the holes on the side
pieces. Secure the 3 pieces together.
4. Attach the mounting brackets to the side pieces included
with the kit
(Figure 5.11)
.
DO NOT over tighten screws that attachment cast pieces
together or to the appliance:
•
Over tightening the screws may cause damage to the
porcelain finish.
Mounting
Brackets
Mounting
Brackets
Figure 5.12
Figure 5.13
G. Surround Panel Extension
Overall
Dimensions
Part Number
Color
44” x 30-1/4”
MED-CB
Classic Black
MED-BM
Majolica Brown
Table 5.2
Overall
Dimensions
with
Extension
Extension
Part Number
Cast
Surround
Part
Number
Color
49-1/2” x 33”
EXPVC-3349
MED-CB
Classic
Black
MED-BM
Majolica
Brown
Table 5.3
Panel Extension Assembly
1. Align holes from Surround Extension RH Side and
Surround Extension Top
(Figure 5.14)
.
2. Using a Phillips head screwdriver and three (3)
#8 x 1/2 Phillips head screws; secure Surround Extension
RH Side to Surround Extension Top
(Figure 5.14)
.
3. Repeat steps 1 and 2 for Surround Extension LH Side
(Figure 5.15)
.
Figure 5.14
NOTE:
Due to variances in cast manufacturing, it may be
required to add a 1/4 inch SAE washer to the surround
assembly between the securing brackets and the
mounting location
(Figure 5.13)
.
Do not pick up assembled appliance by its corners. It
is too heavy and may damage the surrounds. Pick up
from center.
CAUTION
!
1. Slide cast trim assembly over the top of the appliance
and set in position by guiding the right and left cast side
bracket through the slots on the side of the appliance.
Gently drop the assembly down into place
(Figure 5.12)
.
Do not pick up assembled appliance by its corners. It
is too heavy and may damage the surrounds. Pick up
from center.
CAUTION
!