Vermont Castings KHLDV400NTSCSB Скачать руководство пользователя страница 41

Страница: 41 / 68

20306742

KHLDV Series Gas Fireplace

TOUCH SCREEN REMOTE CONTROL OPERATION

the

ame height if none of the menu buttons (TIMER,

THERMO, LIGHT, FAN, AUX) are
pressed and

ashing.

1. Press the ON/up button to turn

on the

replace. The

ame icon

on the LCD displays High.

2. Press the OFF/down button to

decrease the

ame height and

turn off the

replace. When the

OFF/down button is pressed
for three times, the

ame icon

changes form High to Medium,
to Low, then to Off.

3. If the OFF button is held for

more than 3 seconds at any

ame height, the

replace will

be turned off and the

ame icon disappears.

4. Sliding up and down on the arrow buttons can also

turn on or turn off the

replace.

5. If the

replace is shut off using the above methods in 3

and 4, all the settings will be re-
membered and will be resumed
next time the

replace is turned

on (Memory Off).

Timer Mode
Figure 49

Press the TIMER button to enter
timer mode. The

replace will stay

on for a period of time as speci

by the timer and then be shut off
by the transmitter when the timer
counts down to zero.
1. When the TIMER button is

pressed, the Set Time appears
in the frame of the button and

ashes.

2. Use ON/up and OFF/down to increase or decrease the

Set Time in 15 min. increments, between 0:00 to 6:00.
Sliding up and down on the arrow buttons will increase
or decrease the Set Time in 1 hour increments.

3. Push the TIMER button again to con

rm the Set Time,

the transmitter sends an ON signal to turn on the

re-

place.

4. The

ashing stops and the ON/up and OFF/down but-

tons become

ame height controller again. The

ame

height will then stay as set up by the ON/up and OFF/
down buttons.

5. The TIMER button can be used when the transmitter

is in Manual Mode or in Thermostat Mode. In both
modes, the

replace will be shut down completely

when the timer counts down to zero.

6. To exit Timer Mode,

a. Push and hold the TIMER button for 3 seconds Or
b. Use the OFF/down buttons

to decrease the Set Time to
zero Or

c. Slide down on the arrow but-

tons to exit TIMER mode and
shut off the

replace.

Thermostat Mode
Figure 50

Press the THERMO button to set
the transmitter in thermostat mode.
The transmitter will automatical-
ly turn on the

replace when the

room temperature is below the set
temperature and turn off the appli-
ance when the room temperature
is above the set temperature within one degree.
1. When the THERMO button is pressed, the Set tem-

perature appears in the frame of the button and

ash-

es.

2. Use ON/up and OFF/down to increase or decrease

the Set temperature in 1 degree increments, between
45 degrees and 90 degrees. Slide up and down on the
arrow buttons will increase or decrease the Set Tem-
perature in 10 degrees increments.

3. Press the THERMO button again to con

rm the Set

Temperature. The transmitter will send out an On
signal or an Off signal depending on the relationship
between the Set temperature and the Room tempera-
ture.

4. The

ashing stops and the ON/up and OFF/down but-

tons become

ame height controller again. The

ame

height will then stay as set up by the ON/up and OFF/
down buttons.

5. To exit Thermostat Mode:

a. push and hold the THERMO buttons for 3 sec-

onds or

b. slide down on the arrow buttons to exit Thermo-

stat mode and shut off the

replace.