Vermona kick lancet, Руководство пользователя

Страница: 6 / 15

5 User Guide Kick Lancet
EN
2. In case you want to trigger KICK LANCET using MIDI, connect the
MIDI IN
to the MIDI output
of a keyboard or a sequencer. If you prefer using an analogue trigger signal consult chapter
"Using the analogue trigger-inputs GATE, SWITCH and AUDIO" on page 11 .
3. Connect the
OUTPUT
jack of KICK LANCET to an appropriate audio input of a mixing
console, an audio-interface or an amplifier.
⚠
CONNECT FIRST, AND THEN SWITCH ON! To protect your speakers,
your audio-interface and, last but not least, your ears, we urgently
recommend, setting up all cable connections while the equipment is
switched off. Do not underestimate level peaks and resulting possible
damage that could occur when plugging in or remove audio cables.
4. Start KICK LANCET by switching on
OVERKILL
on the unit’s rear. The corresponding green
LED will be lit.
Congratulations, KICK LANCET is now ready to take off. Within the following sections we describe
how the sound generation works and the use of controls and connections.