10
MIDI functions of KICK LANCET
KICK LANCET receives MIDI notes including velocity data, allowing the sound to be played
dynamically. The note numbers and MIDI-channel can be set as desired. In addition, the function
of
GATE
and
AUDIO
jacks can be adapted using MIDI control commands (
see "Using the analogue
trigger-inputs GATE, SWITCH and AUDIO" on page 11
).
Setting the MIDI-channel and note number
By default, KICK LANCET receives data on MIDI-channel 1 and note number 36 (C). To change the
note number and the MIDI-channel carry out the following steps:
1. Deactivate
OVERKILL
to switch off KICK LANCET - all LEDs are off.
2. Press and hold the
TRIG
button while restarting the unit by pressing
OVERKILL
. The LED
above the
TRIG
button starts blinking.
3. Send a MIDI note to KICK LANCET, e.g. by hitting a key on your master keyboard connected
to the unit. KICK LANCET stores the corresponding note number and MIDI-channel and
automatically changes to play mode.
RESET
You can reset the MIDI-channel and note number settings to factory default. Step one and two
equals the procedure above for setting the MIDI channel. Only step three differs:
3. Deactivate KICK LANCET by pressing
OVERKILL
again. The next time you start the unit, it
will be reset to factory defaults.
Содержание kick lancet
Страница 1: ...User Guide Kick Lancet...
