Vermona kick lancet, Руководство пользователя

Страница: 13 / 15

12
SWITCH
This jack allows triggering KICK LANCET with a simple switch contact with a short circuit. You may
use a common foot pedal with an A-contact. Naturally, dynamic aspects will not be reflected using
this method.
AUDIO
This input allows triggering KICK LANCET by any audio source. Naturally, the quality of this function
is highly depending upon the audio signal itself. Only clear percussive sound signals will result in
usable results. A reasonable sound source would be the individual output of a drum machine for
example. This way, an old drum machine with PCM sounds can be easily combined with the deep
and rich sound of KICK LANCET.
Because of the similarity of the signals, this input may also be used to connect a drum pad.
The input’s sensitivity can be adjusted using the submerged trim pot next to the
AUDIO
jack.
The function of the AUDIO jack can be specified by MIDI control command #85. You need to send a
corresponding value (0 or 1) on the set MIDI-channel to KICK LANCET:
CC# 85 Value Description
0 fixed volume
The sound of KICK LANCET will be triggered with a fixed volume,
independently from intensity of the input signal.
1 dynamic (factory default)
KICK LANCET will be triggered dynamically, depending on the volume of
the input signal.