Eclips X4, Eclips X4 30°
2012-01
Page 21
3. Loosen the bolts
so the brake
mechanism can slide over the guide
.
4. Pull the brake mechanism over the guide
to
the desired position.
5. Retighten the bolts .
6. Check working of the brakes.
7. If necessary repeat the above steps until the
brakes are adjusted well.
3.8 Adjusting of the footrests
3.8.1 Length of the footrests
L
L
L
L
CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
Adjust the length of the footrests as follow (3 positions possible: steps 35 mm
→
holes
outside tube, 6 positions possible: steps 25 mm
→
inner tube):
(Fig A)
1.
Remove the screw
.
2.
Adjust the length of the footrest to a comfortable length.
3.
Tighten the screw
properly.
3.8.2 Depth of the footplate
Adjust the depth of the footplate as follow (in three different positions: steps 20 mm):
1.
Remove the screws .
(Fig B)
2.
Adjust the depth of the footrest to a comfortable position
(Fig A)
.
Position 1: hole 2 and 4
Position 2: hole 3 and 5
Position 3: hole 4 and 6
3.
Tighten the screws properly .
(Fig B)
A
B
