Vermeiren Ceres 3, Инструкция по эксплуатации

Страница: 20 / 172

Ceres 3 Deluxe, Ceres 4 Deluxe
2015-06
Page 18
3.2 Manner of delivery
The scooter shall be delivered with:

1 frame with armrests, steering unit, rear and front wheels

1 footplate

1 seat

Manual

Accessories

2 batteries, battery charger, motors
3.3 Adjusting the steering unit
The steering unit can be adjusted in to many different positions to suit each driver.
L
WARNING: Risk of injury - Never adjust the angle while you are driving.
L
WARNING: Risk of injury - Turn the scooter off before you adjust the angle of the steering
unit.
1. Loosen the starknob.
2. Adjust the steering unit in the desired position.
3. Tighten the starknob to secure the steering unit.
3.4 Adjusting the seat
L
WARNING: Risk of injury - Never perform adjustments while you are driving.
L
WARNING: Risk of injury - Make sure that the seat is locked securely.
Remove seat (Fig. A)

Pull the seat lever

upwards.

Turn the seat

a little bit and lift the seat out the adjustment bar

.

Release the seat lever

.
Locking the seat in place (Fig. A)
Do the reverse when you want to replace the seat.

Pull the seat lever

up and at the same time put the seat

on the adjustment bar

and press
as far down as it will go.

When you hear the seat lock in place, the seat lever

must be in a horizontal position. If it is still
pulled upward, the seat has not been locked in place yet.
Swivel seat (Fig. A)

Pull the seat lever

upwards.

Turn the seat

in the desired direction.

Release the seat lever

, and the seat will always stop after 20°.

Check that the seat is firmly secured.
Depth adjustment (Fig. A)

Pull the seat depth adjustment lever

upwards.

Move the seat

forward or backward over the seat depth rails

.

To lock the seat in place, let go of the lever

once the seat

has reached the desired position.

Swivel the seat a little until it locks in position.

Check the seat is locked securely.