Verkaufsgesellschaft TER 1, Инструкция по монтажу и эксплуатации

Страница: 14 / 40

in question is now free or has been deleted.
• Amend the list of the persons and the memory location numbers accordingly.
• Proceed to deregister any further registered transponder keys as required.
• If no further actions are to be carried out in the memory location menu (see 3.2), return
to the home position by pressing button
„P“ for approx. one second.
3.2.3 Cancelling a non-available transponder key
• Change, if necessary, to the memory location menu (see 3.2).
• Using the „+“ or „-“ buttons (see 3.2), select the memory location number (shown as
a static display) of the memory location that you wish to delete.
• Now press the „+“ and „-“ buttons simultaneously for at least one second
➜
the
memory location number then appears as a flashing display, because the memory
location in question is now free or has been deleted.
• Amend the list of persons and the memory location numbers accordingly.
• Proceed to deregister any further registered transponder keys as required.
• If no further actions are to be carried out in the memory location menu (see 3.2), return
to the home position by pressing button
„P“ for approx. one second.
3.3 Summary of the memory location menu
Display of any memory Transponder key in Action that is possible or
location number front of the reader is taking place
flashing = free not registered Registration, then static display
of the corresponding memory
location number
flashing = free registered Identification, then static display
of the corresponding memory
location number
static = occupied registered Identification, then static display
of the corresponding memory
location number
static = occupied without or not registered Memory location can be
deleted, then flashing display
of the corresponding number
3.4 Setting the impulse duration
From the home position (display: „- -“ ), you can set the impulse duration as follows:
• Press the „+“ button for approx. one second
➜
on the left of the 7-segment display a
small „d“ appears and on the right a number between 0 and 9, representing the set
impulse duration.
• Using the „+“ or „-“ button set the desired impulse duration ( „+“ increases the number,
after the „9“ the „0“ appears again etc.; „-“ decreases the number, after the „0“ the
„9“ appears again etc.).
➤
14 02.2008 TR30A058 RE