Figure 1-6
Veritas 5340 Appliance compute node rear panel overview
1
2
3
4
5
6
7
8
9
10
11
12
13
Table 1-7
Compute node rear panel features and connectors
Function
Number
Power Supply 1 and Power Supply 2 - Dual, redundant, and hot-swappable
power supply modules
1,2
DB-15 VGA monitor connector
3
Serial port - Serial connection for Veritas Technical Support use only
4
Three stacked USB 3.0 Type A serial ports for general use
5
IPMI port - An external RJ45 port used for appliance remote management
purposes
6
eth0/NIC1/host1
■
NetBackup Appliance (eth0/NIC1):
Used for the initial configuration of the appliance. After completing the initial
configuration, you can connect NIC1 (eth0) to an administrative network that
does not provide any backup data transfer. For more information, see the
NetBackup™ 53xx Appliance Initial Configuration Guide
.
Note:
Veritas does not support forming a NIC bond using eth0/NIC1 with
other eth/NIC ports.
■
Flex Appliance (host1):
A 1-GbE port copper connector that you can connect to an administrative
network to manage the 5340 Appliance system. It is bonded with host0
during initial configuration as bond mgmt0.
7
22
About the Veritas 5340 Appliance
About the appliance compute node rear panel
