VERITAS Claire Скачать руководство пользователя страница 78

Страница: 78 / 80

Seam

gather or

pucker

Seam

puckering

Patterns

are

distorted

The

machine

is noisy

The

machine

jams

1. The needle is too thick for the

fabric.

2. The stitch length is wrong.
3. The thread tension is too tight.

Select a finer needle.

2. Readjust the stitch length.
3. Loosen the thread tension.

1. The needle thread tension is

too tight.

2. The needle thread is not

threaded correctly.

3. The needle is too heavy for the

fabric being sewn.

4. The stitch length is too long for

the fabric.

5. If you are sewing on thin fabric.

1. Loosen the thread tension.

2. Rethread the machine.

3. Choose a needle to suit the

thread and fabric.

4. Make the stitch length

shorter.

5. Sew with a stabiliser

material under the fabric.

1. The correct presser foot is not

used.

2. The needle thread tension is

too tight.

1. Select the correct foot.

2. Loosen the thread tension.

1. Thread is caught in the hook.
2. The feed dogs are packed with

lint.

Remove the upper thread

and bobbin case, turn the

handwheel backwards and

forwards and remove the

thread remnants.

Fluff or oil have collected on

the hook or needle bar.

2. The needle is damaged.
3. Slight humming sound coming

from internal motor.

4. Thread is caught in the hook.
5. The feed dogs are packed with

lint.

1. Clean the hook and feed

dog.

2. Replace the needle.
3. Normal.

Needle

breaks

1. The machine is not correctly

threaded.

2. The bobbin case is not

threaded correctly.

3. Needle/ fabric/ thread

combination is wrong.

4. The thread tension is wrong.

1. Check the threading.

2. Thread the bobbin case as

illustrated.

3. The needle size must suit

the fabric and thread.

4. Correct the thread tension.

Loose

stitches

7. The upper thread tension is

too tight.

7. Loosen the upper thread

tension.

19
23

19
31

Remove the upper thread

and bobbin case, turn the

handwheel backwards and

forwards and remove the

thread remands.

Problem

Cause

Correction

Reference

Содержание Claire

















































































Результаты поиска

Содержание Claire

Отзывы:

Похожие инструкции для Claire

Бренды по названию

Популярные бренды

VERITAS Claire, Инструкция по эксплуатации

Результаты поиска

Содержание Claire

Отзывы:

Похожие инструкции для Claire

Бренды по названию

Популярные бренды