VERITAS Anna Скачать руководство пользователя

Страница: 49 / 52

Problem

Cause

Correction

Reference

Loose

stitches

1. The machine is not correctly

threaded.

1. Check the threading and

rethread.

2. The bobbin case is not

threaded correctly.

2. Thread the bobbin case as

illustrated.

3. Needle/ fabric/ thread

combination is wrong.

3. The needle size must suit the

fabric and thread.

4. The thread tension is wrong.

4. Correct the thread tension.

Seam

gather or

pucker

1. The needle is too thick for the

fabric.

1. Select a correct needle size.

2. The stitch length is wrong.

2. Adjust the stitch length.

3. The thread tension is too tight. 3. Loosen the thread tension.

Seam

puckering

1. The needle thread tension is

too tight.

1. Loosen the thread tension.

2. The needle thread is not

threaded correctly.

2. Rethread the machine.

3. The needle is too heavy for the

fabric being sewn.

3. Choose a needle to suit the

thread and fabric.

4. The stitch length is too long for

the fabric.

4. Adjust the stitch length shorter.

5. Sewing on thin fabric.

5. Sew with a stabiliser material

under the fabric.

Patterns are

distorted

1. The presser foot is not suited

for the pattern.

1. Select the correct foot.

2. The needle thread tension is

too tight.

2. Loosen the thread tension.

Thread has

jammed

1. Thread is caught in the hook.

Remove the upper thread and

bobbin case, turn the handwheel

backwards and forwards and

remove the thread remnants.

2. The feed dogs are packed with

lint.

The

machine is

noisy

1. Fluff or oil have collected on

the hook or needle bar.

1. Clean the hook and feed dog.

2. The needle is damaged.

2. Insert a new needle.

3. Thread is caught in the hook.

Remove the upper thread and

bobbin case, turn the handwheel

backwards and forwards and

remove the thread remands.

4. The feed dogs are packed with

lint.

Uneven

stitches,

uneven feed

1. Poor quality thread.

1. Select a better quality thread.

2. The bobbin case is threaded

uncorrect.

2. Remove the bobbin case and

the thread and reinsert them

correctly.

3. Fabric has been pulled on.

3. Do not pull on the fabric while

sewing, let it be taken up by

the machine.

Содержание Anna





















































Результаты поиска

Содержание Anna

Отзывы:

Похожие инструкции для Anna

Бренды по названию

Популярные бренды

VERITAS Anna, Инструкция по эксплуатации

Результаты поиска

Содержание Anna

Отзывы:

Похожие инструкции для Anna

Бренды по названию

Популярные бренды