VERITAS Anna, Инструкция по эксплуатации

Страница: 34 / 52

34
1
2
1
Pull the buttonhole lever all the way
down and position it behind the
bracket on the buttonhole foot.
1
Buttonhole lever
2
Bracket
Slightly hold the end of the upper
thread and start sewing.
Note:
Gently feed the fabric by hand.
Before stopping, the machine will
automatically sew a reinforcement
stitch after the buttonhole is sewn.
Raise the presser foot and cut
the thread. To sew over the same
buttonhole, raise the presser foot (it
will return to its original position).
After sewing the buttonhole stitch,
raise the buttonhole lever as far as it
will go.
1
Buttonhole lever
Cut the center of the buttonhole being
careful not to cut any stitches on either
side. Use a pin as a stopper at the bar
tack so you do not cut too much.
Note:
When cutting the buttonhole with the
seam ripper, do not place your hands
in the cutting direction, otherwise
injuries may result.