VERITAS Anna, Инструкция по эксплуатации

Страница: 21 / 52

21
Changing the presser foot
1
1
2
2
1
2
1
Attention:
Turn the power switch to off ("O") when
carrying out any of the operations below!
Remove the presser foot
Raise the presser foot bar. Press the
back lever to release the presser foot.
1
Lever
Attach the presser foot
Lower the presser foot holder until the
cut-out meets the pin.
The presser foot will attach to the presser
foot holder automatically.
1
Cut-out
2
Pin
Remove and insert the presser foot
holder
Raise the presser foot bar. Align the
presser foot holder with the lower left
side of the presser bar. Hold the presser
foot holder, then tighten the screw using
the screwdriver.
1
Presser foot bar
2
Presser foot holder
Insert the edge/ quilting guide
Insert the edge/ quilting guide in the slot
as illustrated. Adjust the needed width
according to your sewing applications.
1
Slot
2
Edge/ quilting guide