clean soft cloth. At the same time, the solvents in the wax will remove any
harmful oils left from your fi ngers that can lead to corrosion.
Keep in mind that paste wax contains silicone that, if transferred to your
workpiece, could cause fi nishing problems such as "fi sh eyes". To avoid this
problem, use silicone-free products, such as Waxilit
®
sliding agent and glue
release, or a tool surface sealant. Either is an excellent alternative to regular
paste wax. However, before treating with a sealant, wipe off any fi ngerprints
with a cloth dampened with a small amount of light machine oil. Remove
any residual oil; then apply the sealant to the scraper shave’s sole.
If storage conditions are damp or humid, your scraper shave should, in
addition to the treatment outlined above, be wrapped in a cloth or stored in
a plane sack. This precaution will also guard against dings and scratches.
Every so often, take the scraper shave apart to clean and lubricate it where
necessary. Remove the toe and the blade. Clean all parts with a cloth
dampened with a dab of light machine oil. For corrosion, we recommend you
fi rst remove the rust with a fi ne rust eraser, then treat as described above.
The bright fi nish on the brass components can be maintained as above. If
a patina fi nish is preferred, simply leave the brass components unprotected
until the desired level of oxidation has occurred, then apply a sealant.
If you want to make them bright and shiny again, you can revitalize the
surface with a brass polish.
The rosewood handles have a lacquer fi nish and should require nothing
more than a wipe with a clean cloth from time to time.
Accessories
05P33.71
Replacement Scraper Shave Blade
05P33.20
Hardware Kit for Spokeshave Handles
814 Proctor Avenue
Ogdensburg, New York
13669-2205 USA
1090 Morrison Drive
Ottawa, Ontario
K2H 1C2 Canada
www.veritastools.com
684
© Veritas Tools Inc. 2006
INS-323 Rev. A
Printed in Canada.
Содержание 05P33.70
Страница 1: ...Scraper Shave 05P33 70 ...
