Veris E51C2, Руководство по установке

Страница: 19 / 34

ZL0067-0E Page 19 of 34 ©2018 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 0818
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
E51C2, E51C3 Installation Guide
R/W
R=read only
R/W=read from either int or float formats, write only to integer format.
NV Value is stored in non-volatile memory. The value will still be available if the meter experiences a power loss and reset.
Format
UInt Unsigned 16-bit integer.
SInt Signed 16-bit integer.
ULong Unsigned 32-bit integer; Upper 16-bits (MSR) in lowest-numbered / first listed register (001/002 = MSR/LSR).
SLong Signed 32-bit integer; Upper 16-bits (MSR) in lowest-numbered / first listed register (001/002 = MSR/LSR).
Float 32-bit floating point; Upper 16-bits (MSR) in lowest-numbered / first listed register (257/258 = MSR/LSR). Encoding is
per IEEE standard 754 single precision.
Units Lists the physical units that a register holds.
Scale
Factor
Some Integer values must be multiplied by a constant scale factor (typically a fraction), to be read correctly. This is done to allow
integer numbers to represent fractional numbers.
Range Defines the limit of the values that a register can contain.
Standard Modbus
Default Settings
Setting Value Modbus
Register
Setup Password 00000 –
Reset Password 00000 –
System Type 40 (3 + N) Wye 130
CT Primary Ratio (if CTs are not included) 100A 131
CT Secondary Ratio 1V 132
PT Ratio 1:1 (none) 133
System Voltage 600 V L-L 134
Max. Theoretical Power
(Analog Output: full scale (20mA or 5V)) 104 kW 135
Display Mode 1 (IEEE units) 137
Phase Loss 10% of System Voltage (60V), 25% Phase to Phase Imbalance 142, 143
Pulse Energy 1 (kWh/pulse) 144
Demand: number of sub-intervals per interval 1 (block mode) 149
Demand: sub-interval length 900 sec (15 min) 150
Modbus Address 001 –
Modbus Baud Rate 19200 baud –
Modbus Parity None –
Log Read Page 0 158
Logging Configuration Register 0 159
Log Register Pointer 1 3 (Import Real Energy MSR) 169
Log Register Pointer 2 4 (Import Real Energy LSR) 170
Log Register Pointer 3 5 (Export Real Energy MSR) 171
Log Register Pointer 4 6 (Export Real Energy LSR) 172
Log Register Pointer 5 29 (Real Demand) 173
Log Register Pointer 6 30 (Reactive Demand) 174
Log Register Pointer 7 31 (Apparent Demand) 175
Log Register Pointer 8 155 (Month/Day) 176
Log Register Pointer 9 156 (Year/Hour) 177
Log Register Pointer 10 157 (Minutes/Seconds) 178
Modbus Point Map
Overview (cont.)