background image

Z207934-0A 

Page 4 of 4 

©2021 Veris Industries   USA 800.354.8556 or +1.503.598.4564  / [email protected] 0121 

 

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of  Veris Industries, L.L.C. in the USA and/or other countries.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

CWV2 Installation Guide

Installation (cont.)

Switch

Function

Description

1

Output mode

ON - 4-20mA output mode enabled
OFF - Voltage output mode enabled

2

Voltage output range*

ON - 0-5V output range enabled
OFF 0-10V output range enabled

3

Automatic Baseline Calibration (ABC) 

for CO2

ON - ABC enabled 
OFF - ABC disabled

4

Unused

Unused

5

Unused

Unused

6

Unused

Unused

7

Unused

Unused

8

Unused

Unused

* Only used with voltage output mode enabled.

6.  With sensor base fully installed, align top of cover to mounting tabs on top of sensor base. Swing cover downward until it 

latches at the bottom. 

 

7.  Install locking screw to secure cover in closed position. 

 

China RoHS 

Compliance 

Information

本表格依据

SJ/T11364

规定编制。

O: 

表示

该有害物质在该部件所有均质材料中的含量均在

GB/T 26572

规定的限量要求以下。

X: 

表示

该有害物质至少在该部件的某一均质材料中的含量超出

GB/T 26572

规定的限量要求。

(企

业可在此处,根据实际情况对上表中打

的技

术原因进行进一步说明。)

This table is made according to SJ/T 11364.

O: indicates that the concentration of hazardous substance in all of the homogeneous 

materials  

for this part is below the limit as stipulated in GB/T 26572.

X: indicates that concentration of hazardous substance in at least one of the homogeneous   

X

O

O

O

O

O

materials used for this part is above the limit as stipulated in GB/T 26572

Z000057-0B

部件名称

Part Name

有害物

-

Hazardous Substances

(Pb)

(Hg)

(Cd)

六价

(Cr (VI))

多溴

联苯

(PBB)

多溴二苯

(PBDE)

电子件

Electronic

Environment-Friendly Use Period (EFUP) Table

Содержание CWV2

Страница 1: ...ving space is for use with BAS controllers designed to accept 4 to 20mA 0 to 5 Vdc or 0 to 10 Vdc outputs This sensor measures CO2 levels using a dual beam non dispersive infrared NDIR technology The CWV2 Value sensor with an accuracy of 40 ppm 5 5 of measured value is ideal for bid spec applications CWV2 Value Wall Mounted Air Quality Sensor Specifications OPERATING ENVIRONMENT Input Power Class2...

Страница 2: ...ion Guide Dimensions Functions 115 4 5 85 3 3 24 0 9 The CWV2 sensor measures CO2 and temperature if equipped in a room and provides analog outputs to a controller 1 Remove the cover from the base at the bottom of the device 2 Position the sensor base vertically on the wall 1 35 m 4 5 ft above the floor with the UP arrow facing upward Locate away from windows vents and other sources of draft If po...

Страница 3: ...rcompanies trademarksareherebyacknowledgedtobelongtotheirrespectiveowners CWV2 Installation Guide 4 Mount the backplate onto the wall using the screws provided Six screw holes available Use a minimum of two for secure mounting Connect the wires to the screw terminals Do not over tighten the screws CWV2 wiring diagram 5 4 3 2 1 COMMON CO2 OUT POWER 24 5 Set the DIP switches ON 1 2 3 4 5 6 7 8 mA Vo...

Страница 4: ...usedwithvoltageoutputmodeenabled 6 With sensor base fully installed align top of cover to mounting tabs on top of sensor base Swing cover downward until it latches at the bottom 7 Install locking screw to secure cover in closed position China RoHS Compliance Information 本表格依据SJ T11364的规定编制 O 表示该有害物质在该部件所有均质材料中的含量均在GB T 26572规定的限量要求以下 X 表示该有害物质至少在该部件的某一均质材料中的含量超出GB T 26572规定的限量要求 企业可在此处 根据实际情况对上表中打...

Отзывы: