![background image](http://html1.mh-extra.com/html/veris-industries/e31a42/e31a42_installation-manual_1004640013.webp)
Z206855-0B
Page 13 of 26
©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 04142
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
Installation Guide
Power Monitoring
E31E Series
TM
Gateway
Configuration
Accessing the Graphical User Interface (GUI)
If the E31E IP address parameters are already configured to work on the network and is being accessed from a PC on that same
network, open a web browser and enter the IP address of the E31E into the address/URL field on the browser. Press enter. The GUI
launches and appears, as shown, in the browser window.
If the E31E IP address parameters are not configured for the network, connect a PC directly and access the GUI from it as follows:
1. Connect a standard CAT5 ethernet cable between a PC and E31E. Secure a ferrite filter (included) around the ethernet cable to
ensure the device meets emission requirements. If the user followed the Installation procedure in this document, then this
cable is already in place.
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30