Veripart VPKVC180B, Руководство пользователя

Страница: 66 / 140

66
EN
6. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTIONS
The appliance
does not cool
at all
- The temperature control knob is
in the Coldest position.
- The plug is not inserted properly.
- There is no voltage on the
socket.
- The fuse is blown or defective.
- Where is the device installed?
Is it located on a balcony, in
a garage, storage room or
other place where the ambient
temperature is less than 16°C?
- Switch the thermostat to
another position.
- Insert the plug properly.
- Open the door and check
if lamp is on. If the lamp
is off, there may be no
voltage on the socket. Have
the socket repaired by an
electrician.
- Check the fuse and replace
if necessary.
- Install the appliance in a
protected location where
the ambient temperature
is higher than 16°C. If
the appliance is installed
in a room with too low a
temperature, the internal
cooling system may not
operate correctly.
The door does
not open
easily.
- You tried to open the door
immediately after closing.
- Wait a few seconds
between closing and re-
opening the door.
Water runs
over the
back of the
appliance
- During the automatic defrosting
process, icing thaws against the
back wall.
- Wipe up the water with a
soft cloth.
You can solve some problems easily yourself using the table below. Caution!
• Before solving the problem, switch off the power supply.
• If the following descriptions do not solve your problem, please contact
our customer service: www.coolblue.nl/en/customer-service
• Only a qualified electrician or authorised person may solve the faults
not contained in this manual. Repairs carried out by unauthorised
persons may cause injury and/or serious damage to persons and
property.
ATTENTION!
!