Verint Nextiva S1100w, Руководство пользователя

Страница: 60 / 107

4: Setting Parameters with the CLI
48 Verint Video Intelligence Solutions
Advanced
The Advanced menu holds a series of advanced setups mainly used by Verint Video
Intelligence Solutions technical support. Some of these parameters are available through
SConfigurator or a video management software.
Identifying a Device
To recognize an S1100w among a large set of devices, you can make its LED flash red
rapidly.
To identify an S1100w device:
1. From the main menu, choose Advanced, then press Enter.
2. Enter i to make the LED flash red. Re-enter i to set the LED to its previous state.
3. Enter p until you are in the main menu.
4. Enter q to exit.
Setting the VSIP Port
The VSIP port (accessible through the VSIP menu) is a communication port used for
protocol messaging between your computer and Nextiva devices. The default VSIP port of
all devices is 5510.
Note: VSIP ports 9541, 65500, and those under 1024 are reserved and should not be used,
not even for serial port, video, or audio communication. The maximum value is
65535.