Proceed as follows for all models, (manual control model shown) :-
a)
Remove the top glass panel retaining trim which is held in position by 5
off screws as shown below in Fig. 3
b)
Remove the left hand glass retaining trim as which is held in position by
3 screws as shown below in Fig. 3
c)
Remove the right hand glass retaining trim as which is held in position
by 3 screws as shown below in Fig. 3
d)
Remove the burner heat shield which is held in position by 2 screws as
shown below in Fig. 3
Fig. 3
11
Left Hand Glass Retaining
Bracket - 3 off screws
Right Hand Glass
Retaining Bracket -
3 off screws
Top Glass Panel Retaining
Trim - 5 off screws
Glass Panel
Burner Heat Shield
2 off screws