Page 10 of 14
Briefing the User
1
Demonstrate the full operation of the appliance to the customer, referring them
specifically to the ceramic granules, any decorative ceramic shapes and the removal
of soot as described in these instructions.
2
Inform the customer that all cleaning procedures should be carried out only when
the appliance is cold.
3
Leave these instructions with the customer.
4
Advise the importance of having the appliance serviced and the chimney checked for
clearance of combustion products on an annual basis.
U
SERS
G
UIDE
Useful tips & recommendations
Once your fire has been fitted, the following recommendations are made to ensure
you enjoy the best results from your purchase;
1
The installation of this appliance must have been carried out by a qualified installer
and in accordance with the requirements of the
Gas Safety (Installation & Use)
Regulations
2
The chimney must be swept before the appliance is installed and checked annually
to ensure continued clearance of combustion products and that there is no
excessive build-up of soot.
3
As with any fire, certain components will become hot in use. Care should be
exercised when approaching the appliance when it is hot. We also recommend that
a fireguard, conforming to BS 6539 or BS 6778, be fitted for the protection of young
children, the elderly or infirm.
4
When new any ceramic components may produce a slight odour, but this will
completely vanish after a few hours of use.
5
Handle any ceramic components gently (See warning on Page 9). They are fragile. A
soft brush can be used to clean them of any excess soot.
UNDER NO
CIRCUMSTANCES
should they be washed.
6
Never throw cigarette ends or other foreign matter onto the fire.
7
Never leave the house unattended, with the fire alight, for long periods.
8
Check periodically that any purpose-made ventilation is free from obstruction.
9
To obtain the best results from your fire we recommend that it be serviced annually.
10
These instructions are provided to assist you to operate the fire correctly and should
be kept in a safe place.
11
This appliance is intended for decorative purposes.
12
This appliance is fitted with a flue blockage device that will shut off the appliance in
the event of abnormal flue conditions. This device is NOT a substitute for an
independently mounted carbon monoxide detector.
