7
Assembly Instructions
2.
Hold the upper shaft with one hand
and release the ergonomic height
adjustment lever by gently pulling it
upward as shown in Fig. 2. Extend
the upper shaft approximately
12". Lock the adjustment lever by
gently pushing it downward. Once
assembly is complete, raise or
lower the upper shaft to the desired
height by releasing and locking the
height adjustment lever.
Fig. 2
1.
Attach the lamp head gooseneck to
the shaft until the screw holes line up
as shown in Fig. 1. Use care when
tucking the wire into the shaft. Insert the
screw using the tightening tool and turn
clockwise to tighten.
Close-up of screw hole in
the lamp head
Fig. 1
VF02_MAN_Rev14.indd 7
12/29/11 4:25 PM