9
Bulb Replacement
Fig. 7
Correctly Seated Bulb
Incorrectly Seated Bulb
No Gap
Notice
Large
Gap
Fig. 8
B
D
C
A
Fig. 9
Removal
1.
Unplug the lamp from the power source
and allow bulb to cool.
2.
To access the bulb, remove light diffuser
by depressing the tab and lifting it out
(Fig. 7).
3.
Firmly hold the bulb base (B) and pull
bulb (C) from the socket (A) in an outward
motion (Fig. 8).
Installation
1.
Unplug the lamp from the power source.
2.
Firmly hold the base (B) and push bulb (C)
into the socket (A).
3.
Be sure the bulb is firmly seated in the
socket (Fig. 9) and snapped into the
metal bulb clip (D).
4.
Replace the light diffuser.
Attention:
Do not grip the bulb by the
glass tubes. Only touch the base when
removing or inserting the bulb.
VF02_MAN_Rev14.indd 9
12/29/11 4:25 PM
