Verhagen Leiden bv
Hoge Rijndijk 267
2314 AG Leiden
Nederland
Tel: +31 (0)71 581 30 30
Fax: +31 (0)71 541 61 89
[email protected]
www.verhagenleiden.nl
ING baNk Nr: 678661367 | bIc/swIft: INGbNl2a | IbaN: Nl23 INGb 0678661367 | kvk: 27321531 | btw: Nl 8196.70.340.b.01
Op al onze offertes, op alle opdrachten aan ons en op alle met ons gesloten overeenkomsten zijn toepasselijk de metaaluNIevOOrwaardeN, gedeponeerd ter GrIffIe
van de rechtbank te rotterdam, zoals deze luiden volgens de laatstelijk aldaar neergelegde tekst. de leveringsvoorwaarden worden u op verzoek toegezonden.
reinigingsmachines & elektrovoertuigen
Steering handle (Tiller head)
10
(Optional) Coupling point downward
11
(Optional) Coupling point upward
12
(Optional) Signal switch Horn
13
Drive switch Forwards (up) Backwards (down)
14
Potentio meter, adjustable maximum speed. (2 step optional)
15
Charger plug input
16
Fuses and handheld plug
Steering handles (1)
The steering handle (1) with bar is a fixed part of the V-Move XL+, moving to the left means driving to
the left, and vice versa.
Safety switch (7)
When pressing the safety switch (risk of getting jammed), the V-Move XL+ will stop immediately.
In order to start again, the drive switch must first be placed in the neutral position.
# Coupling point upward (11), # coupling point downward (10)
Optionally, the coupling point can be moved upward/downward with an actuator (spindle motor). This
serves, for instance, to make it easier to move a tandem aXL+e trailer.
# Signal switch (12) only upon request
Optionally, a horn can be connected to the signal switch (5).
Drive switches (13), left and right from the centre
By rotating the drive switch (6) to the front with your thumb, the driving direction will first be switched
on and then, when rotated further, the V-Move XL+ will start to drive. The central position is the neutral
position.
By rotating it downwards, the V-Move XL+ will reverse.
Caution! Only switch to forward or reverse if the V-Move XL+ is standing still.
Ignition lock (5)
The ignition lock (5 fig. 1) is used to switch off the batteries,
aways switch off the battery in case of
maintenance to the V-Move XL+.
5.4
Battery charger connection and Batteries (15)
The batteries are filled with lead acid and sealed. They are fully sealed and maintenance free.
It is not possible to refill with distilled water. Press the Emergency Button (6) before charging.
Battery charger connection
The connection plug for the battery charger is located on the right side, in a recess of the encasing.
On the dashboard of the V-Move XL+, the battery indicator (8) is placed. If the BDI (Battery
discharge Index) is below 30% maximum speed is reduced to 50%, this to prevent damage to
the batteries. Make sure you charge right away. BDI 100 % means full charged
If the V-Move XL+ is out of operation (for a longer period), we recommend keeping the battery charger
connected, it will automatically keep the battery in a charged condition.
Charging location
The charging location must be well ventilated, because very explosive gases (detonating gas) are
continuously released during charging.
Avoid open fire or sparks at the charging location while charging. During charging, an explo-
sive gas may be released.
The battery charger (# optional) operates fully automatically, i.e. the charger is equipped with an
10
