Verhagen Leiden V-Move M Скачать руководство пользователя страница 17

Verhagen Leiden B.V. 

|

  Hoge Rijndijk 267 

|

 2314 AG Leiden 

|

 T: +31 (0)71 581 30 30 

|

 F: +31(0)71 541 61 89

 

 

 

 

 

 

16 

 

[email protected] 

|

 www.verhagenleiden.nl

 

 

7.3 

Spare and wearing parts 

 
When ordering (spare) parts at Verhagen Leiden BV, the following information  must be stated: order 
number,  description,  drawing  number,  position  number,  Amperage  (if  applicable)  and  the  desired 
number of pieces. 
 
Only original Verhagen Leiden BV parts and accessories may be used on the V-Move. 

7.4 

Battery life 

Misuse of the batteries can cause them to wear out quickly. Rapid wear is not covered by the 
warranty. 
 

Tips for long life: 

1.  We  recommend  never  draining  the  battery  completely.  It  is  also  not  good  to  continue 
charging an almost full battery. 
2. The direct charging of an empty battery considerably improves the service life. Discharging 
further than 20% adversely affects the service life. 
3. Never interrupt charging, completely complete the charging. 
4. If the V-Move is out of service (for a longer period of time), it is advisable to keep the battery 
charger connected, it will keep the battery in a charged state automatically. 
5.  If  the  batteries  are  overloaded,  this  will  greatly  shorten  the  service  life.  It  is  therefore 
necessary to adjust the load. 
6. It is advisable not to fully discharge the batteries. If this happens a lot, this will also result in 
faster wear. Pay close attention to the battery condition meter, connect the battery charger in 
time. 
7. The batteries must be charged with a correct charger and for a certain time. If the charging 
current  is  too  low  or  the  duration  of  the  charging  is  too  short,  the  batteries  will  not  be  fully 
charged and the capacity in the batteries will become too low for your application, resulting in 
faster wear. If the charging current is too high or the duration of the charging is too long, the 
battery will be overcharged. The plates of your battery will overheat and be damaged. 
8. If the batteries are only 60% empty and connected to the charger, the batteries will not have 
the  time  to  unwind.  The  temperature  of  the  batteries  will  rise,  resulting  in  faster  wear.  The 
voltage  of  the  battery  will  also  become  higher  than  the  actual  energy  condition,  so  that  a 
discharge limiter will no longer work correctly. 
9.  The  temperature  of  the  battery  must  not  rise  too  high,  as  the  acid  becomes  more 
aggressive. Working with and loading in a cool room improves the lifespan. 
10.  If  the  batteries  are  used  more  than  3  days  a  week,  they  will  wear  out  faster.  When 
choosing the batteries, it is important to take into account the frequency of use. 
11.  A  battery  slowly  discharges  due  to  self-discharge.  If  a  battery  remains  in  a  discharged 
state, it will sulphate and can be irreparably damaged. We therefore recommend reloading a 
V-Move that is stored at least every 3 months. 

 
When replacing the battery, the old battery must be disposed of in accordance with local regulations 
 
 
 

Содержание V-Move M



















Отзывы: