Maintenance
6
|
P a g e
2.0v-04.2013
FL-Auto control
Verderflex Vantage 3000 C
2.0v-12.2013
6
|
P a g e
7.1
Types of pump head
Verderflex® Vantage 3000 pumps are available with the S10 pump head featured on the Verderflex Smart tube
pump, as well as the R3i head featured on the Verderflex Rapide tube pump providing greater flow rates with
stackable and multi channel head options.
7.2
EZ head
7.2.1
Key features
Easy tube change system, stackable multi
head options with Verderprene, Silicone,
Viton® or Tygon® tubing.
Flow rates up to 1,310 ml/min (20.8 US
GPH)
Pressures up to 2 Bar (29 PSI)
Typically used in frequent tube change
applications
7.2.2
Installing the tube
1. Flip the lugs on both sides of the pump head
to lift the top section
2. Once the head is lifted as shown in figure,
insert the tube over the rollers.
3. Flip the lugs on both sides of the pump head
to lock the top section down.
-
Adjust the tube clamp to hold the tube
in place and avoid slip
-
Adjust the tube clamp on both sides of
the pump head to the tube diameter.
-
If a tube slip is observed, tighten the
tesion on the clamps
-
Alternately, if a reduced flow is
observed, reduce the clamp tension.
Table 3 Installing the tube
1.
EZ Head
2. R3i Head
3. S10 Head
Table 2 Vantage 3000 pump head options
2
5
6
1
3
4
