VERDER HI-CLEAN VA-2H80, Запасные части

Страница: 10 / 32

Repair
Reassemble Reassemble Reassemble Air Air Air Valve Valve Valve
NOTE: NOTE: NOTE: If repairs involve removing
fluid covers, perform the steps in
Reassemble the Overmolded Diaphragms, page 16 ,
prior to reassembly of the air valve. The air valve
configuration will be modified to aid fluid cover
installation.
NOTE:
NOTE: NOTE: Apply lithium-based grease whenever
instructed to grease. Order Verder PN 819.0184.
1. Use all parts in the repair kits. Clean other parts
and inspect for damage. Replace as needed.
2. Grease the detent cam (104d) and install into
housing (104a).
3. Grease the u-cups (104h) and install on the
piston with lips facing toward the center of the
piston.
4. Grease both ends of the piston (104b) and the
housing bore. Install the piston in the housing
(104a), with the flat side toward the cup (104n).
Be careful not to tear u-cups (104g) when sliding
piston into housing.
5. Grease new o-rings (104f) and install on the
end caps (104g). Install the end caps into the
housing.
6. Install a retaining ring (104k) on each end to hold
end caps in place.
1
Apply lithium-based
grease.
2
U-cup lips must face
piston.
3
Apply lithium-based
grease to contact
surface.
KEY KEY KEY
AI
AI
AI Air Inlet
10 812.0066