VERDER HI-CLEAN VA-2H25, Операция

Страница: 5 / 32

Configuration Number Matrix
812.0061 5
Configuration Number Matrix
Check the identification plate (ID) for the Configuration
Number of your pump. Use the following matrix to define the
components of your pump.
When you receive your pump, record the 8 character part
number found on the shipping box (e.g., 811.0018):
_____________
Also record the configuration number on the pump ID plate to
assist you when ordering replacement parts:
_____________________________________
NOTE: Some combinations are not possible. Please check with your local supplier.
Sample Configuration Number: VA-2H40XS-STTFTSD4SB21
VA-2H 40 X S ST TF TS D4 SB 21
Pump
Model
Pump
Size
Wetted
Parts
Air
Section
Seat Material Balls Diaphragms Connections Options Certification
Pump
Model
Pump Size Wetted
Parts Material
Air
Section Material
Seat Material
VA-2H 25 25 mm X High Sanitation,
3-A 0.8
μ m
E Polished Stainless Steel SB Stainless Steel, Buna-N gasket
40 40 mm SE Stainless Steel, EPDM gasket
52 50 mm (2 inch
ports) Y Pharmaceutical,
0.5
μ m
S Stainless Steel ST Stainless Steel, EP-TF gasket
53 50 mm (3 inch
ports) SV Stainless Steel, FKM gasket
54 50 mm (4 inch
ports)
Ball Material Diaphragm Material Connections Options Certification
BN Buna-N ball BN Buna-N D2 DIN 11851 (DN25) 3A 3-A 21 EN 10204 type 2.1
EP EPDM ball EO EPDM Overmolded D4 DIN 11851 (DN40) FH Flapper
horizontal
31 EN 10204 type 3.1
FL Stainless Steel
flapper SO Santoprene
Overmolded
D5 DIN 11851 (DN50) FP Flapper
poultry
NW Polychloroprene
weighted ball SP Santoprene D8 DIN 11851 (DN80) SB Sanitary
ball
SP Santoprene ball TO PTFE Overmolded D1 DIN 11851 (DN100) SF Sanitary
flapper
TF PTFE ball TS PTFE/Santoprene,
2-piece
T2 TRI-CLAMP 1”
VT FKM ball VT FKM T4 TRI-CLAMP 1.5”
T5 TRI-CLAMP 2”
T8 TRI-CLAMP 3”
T1 TRI-CLAMP 4”