VERDER Carbolite Gero CSR, Инструкция по установке и эксплуатации

Страница: 28 / 32

11.3 Cleaning
Note: Disconnect the product from the electrical supply before carrying
out any maintenance procedures.
l
With the product switched off, cold, and electrically isolated from the mains, wipe
over surfaces using a damp cloth, wrung almost dry.
l
DO NOT use solvents.
l
If necessary, vacuum out the inside of the product to remove any dust or minor
debris and dispose of any material removed, in accordance with local regulations, at
an approved disposal facility.
11.4 After-Sales Service
Carbolite Gero Service has a team of Service Engineers who can offer repair, calibration
and preventive maintenance of furnace and oven products both at the Carbolite Gero
factory and at customers’ premises throughout the world. A telephone call or email
often enables a fault to be diagnosed and the necessary parts to be despatched.
In all correspondence please quote the serial number and model type given on the
rating label of the product. The serial number and model type are also given on the
back of this manual when supplied with the product.
Carbolite Gero Service and Carbolite Gero contact information can be found on the
back page of this manual.
11.5 Recommended Spare Parts and Spare Parts Kit
Carbolite Gero can supply individual spare parts or a kit of the items most likely to be
required. Ordering a kit in advance can save time in the event of a breakdown.
Please consult Carbolite Gero's Sales Department for details of recommended spare
parts.
28