7
Rear Panel Area
Along the rear panel you will fi nd the interface connectors and a recessed
micro-switch that is used for reset functions. Refer to the fi gure below.
Reset Button. If the NAS drive is having a problem connecting
1.
to the local area network (LAN) or appears to be hung, press the
Reset button momentarily with the end of a paper clip. This will
cause the unit to reset, similar to rebooting your PC. If the problem
persists, or if you are unsure of current settings (such as forgetting
your administration password), press and hold in the Reset button
for 5 seconds. This will restore the factory default settings.
DC Input Connector. Connect the DC cable of your included AC
2.
Adapter to the DC Input Connector.
USB-A Connector. Use this connector for attaching a USB printer,
3.
USB fl ash disk, or other USB storage device.
USB-B Connector. Use this connector to attach the NAS drive to
4.
your computer via USB. Refer to “Which Interface: USB or Ethernet”
later in this manual.
Ethernet Connector. If you plan to use the Ethernet interface
5.
to connect to a LAN, then use this connector to attach to your
network equipment. Refer to “Which Interface: USB or Ethernet”
later in this manual.
1
2
3
4
5
