18
The next screen allows you to defi ne a new Hostname for the NAS
5.
drive. If you want to keep the current Hostname, simply press
Next
to advance to the next screen.
The next screen allows you to select between automatic and static
6.
addresses for the NAS drive’s IP Address and Domain Name
System (DNS) address. It is recommended that your network
equipment be enabled to provide DHCP service, and that both
settings on this screen remain at the factory settings.
Alternatively, if your network requires that you defi ne static
addresses, then you may enter them in the form provided.
Press
Next
to continue.
The next screen allows you to manually set the date and time, or
7.
to use an available Network Time Protocol (NTP) server. It is useful
to set the correct date and time because time stamps are used
in the various status logs that are described later in this manual.
After fi lling in your selections, press
Next
.
The settings made in the previous steps are summarized on
8.
this screen for your review. You may either go back to edit your
settings, or press
Complete
to save the settings as shown.
Add New User Account
Next setup a user account by selecting the
9.
Quick Setup
/
Add
User
button.
